单项选择题
What is the use of ERSPAN on N1kv？（）
A. Send monitored traffic to a VLAN
B. Send monitored traffic to a remote VEM over L2
C. Receive monitored traffic on a vEthernet interface
D. Send monitored traffic to an IP destination
相关考题
-
多项选择题
WhichstatementsarevalidforalocalSPANconfiguration？（）
A. Source and destination interface must be on the same host
B. Source and destination interfaces can be on different hosts
C. Destination vEthernet interface can be on a different VLAN than the source
D. Destination interface can be a physical port
E. Destination interface cannot be a physical port -
多项选择题
Given a host with two NICs assigned to a N1k profile，which topologies are suitable for this type of configuration （） port-profile type Ethernet name VM-Data vmware port-group switchport mode trunk switchport allowed vlan 400-410 channel-group auto mode active no shut state enabled
A. Cisco UCS fabric interconnects
B. Pair of N5K’s in VPC
C. Standalone N5K
D. Pair of N5K’s in non-VPC
E. Cisco Catalyst 6000 Switch in VSS -
多项选择题
A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required， and what other changes will need to be made？ （） VSM-PRI-188# sh int vethernet 5 Vethernet5 is up Port description is VM001， Network Adapter 2 HardwarE. Virtual， address： 0050.56b0.001e （bia 0050.56b0.001e） Owner is VM "VM001"， adapter is Network Adapter 2 Active on module 5 VMware DVS port 484 Port-Profile is VM-vlan-10 Port mode is access VSM-PRI-188# sh int vethernet 6 Vethernet6 is up Port description is VM002， Network Adapter 1 HardwarE. Virtual， address： 0050.56b0.0020 （bia 0050.56b0.0020） Owner is VM "VM002"， adapter is Network Adapter 1 Active on module 5 VMware DVS port 485 Port-Profile is VM-vlan-10 Port mode is access
A. Monitor session 1 type span Source interface veth5 both Destination interface veth6 No shut
B. monitor session 1 source vlan 10 destination interface veth6 no shut
C. monitor session 1 type er-span source interface vlan 10 destination ip 10.1.1.10 no shut
D. VM002 must be removed from the Nk1V
E. Move VM002 to Module 5
F. Restart the VEM on module 5
