单项选择题
Enabling jumbo frame support on a Cisco Nexus 5500 Switch can be done through which method？（）
A. changing the default policy map from a default MTU of 1500 to 9216
B. using the command system jumbomtu 9216
C. using the command interface MTU 9216
D. configuring the default Ethernet system class to an MTU of 9216 with a new network QoS policy map
相关考题
-
单项选择题
Inaconfigurationwithredundantsupervisors，howmanyIPaddressesarerequiredtoconfigurefullremoteaccessviamanagement0？（）
A. two IP addresses， one for each supervisor
B. three IP addresses， one virtual IP and one physical IP for each supervisor
C. one IP address that is shared among supervisors
D. none—management 0 will use the IP address from the first SVI that is created -
多项选择题
Whichthreeflow-controlportstatesleadtoenabledlinkflowcontrol？（）
A. Receive port： Enabled， Transmit port： Enabled
B. Receive port： Enabled， Transmit port： Desired
C. Receive port： Enabled， Transmit port： Disabled
D. Receive port： Disabled， Transmit port： Desired
E. Receive port： Desired， Transmit port： Desired -
单项选择题
WhatisthemechanismthatisusedtoallocateMACaddressesthatareassignedtotheVDCforthesystemMACaddress？（）
A. NX-OS uses a random MAC address from the IEEE OUI block that is assigned to Cisco.
B. The VDC system MAC is pulled from the active supervisor and concatenated through a hash to ensure uniqueness.
C. NX-OS uses a value that is based on a range that is assigned to the SPROM of the system backplane.
D. The VDC system MAC is based on a range that is allocated to the first line card that is installed in the switch.
