单项选择题
Your network contains one Active Directory domain. You have a member server that runs Windows Server 2008 R2.You need to immediately disable all incoming connections to the server.
What should you do？（）
A. From the Services snap-in, disable the IP Helper.
B. From the Services snap-in, disable the Netlogon service.
C. From Windows Firewall, enable the Block all connections option on the Public Profile.
D. From Windows Firewall, enable the Block all connections option on the Domain Profile.
相关考题
-
单项选择题
Your company has an IPv4 Ethernet network.A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is as shown in the following table. Network Addresses IPv4 Address 10.128.64.113 Subnet mask 255.255.252.0 Default Gateway 10.128.64.1 The routers are configured as shown in the following table. Router ID Addresses R1 interface 1 R1 interface 2 (To Internet) 10.128.64.1 131.107.108.37 R2 interface 1 R2 interface 2 10.128.64.10 10.128.4.1 WKS1 is unable to connect to the Private1 network by using the current configuration.You need to add a persistent route for the Private1 network to the routing table on WKS1. Which command should you run on WKS1？（）
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add p 10.128.4.0/26 10.128.64.10
C. Route add p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add p 10.128.64.10 mask 255.255.255.192 10.128.4.0 -
多项选择题
Your network uses IPv4. You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with two network interfaces.You need to configure routing on the server at the branch office. Which two actions should you perform？（）
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option. -
单项选择题
You have a DHCP server that runs Windows Server 2008 R2. You restore the DHCP database by using a recent backup.You need to prevent DHCP clients from receiving IP addresses that are currently in use on the network. What should you do？（）
A. Add the DHCP server option 15.
B. Add the DHCP server option 44.
C. Set the Conflict Detection value to 0.
D. Set the Conflict Detection value to 2.
